
Stainless steel sensor
Stainless steel probe Ø 26.5 mm
Features
-
nominal pressure: 0 ... 4 mH2O up to 0 ... 200 mH2O
-
accuracy: 0.1 % FSO
-
diameter 26.5 mm
-
small thermal effect
-
excellent accuracy
-
excellent long term stability
Optional Features
-
IS-version
Ex ia = intrinsically safe for gas and dust -
drinking water certificate according to DVGW and KTW
-
different kinds of cables
-
different kinds of seal materials

Ceramic sensor
Steel probe Ø 39.5 mm
Features
-
nominal pressure range 0 ... 60 cmH2O up to 0 ... 200 mH2O
-
accuracy: 0.1 % FSO
-
diameter 39.5 mm
-
HART®-communication (setting of offset, span and damping)
-
permissible temperatures up to 85 °C
-
high overpressure capability
-
high long term stability
Optional Features
-
IS-version
Ex ia = intrinsically safe for gas and dust -
mounting with stainless steel pipe
-
flange version
-
diaphragm pure ceramic (99.9 % AI2O3)
-
accessoires e.g. assembling and probe flange, mounting clamp

Ceramic sensor
with RS485 Modbus RTU
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
-
accuracy: 0.35% (opt. 0.35 %) FSO
-
output signal: RS485 with Modbus RTU protocol
-
diameter diameter 22 mm
-
excellent long term stability good long term stability
-
highly appropriated for sewage water
Optional Features
-
Drinking water certificate acc. to DVGW and KTW

Ceramic sensor
Probe Ø 22 mm
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
-
accuracy: 0.25 % FSO
-
output signal 4 ... 20mA / 2-wire
-
diameter 22 mm
-
shipping approvals
-
high long term stability
-
diaphragm ceramics Al2O3 (99.9 %)
Optional Features
-
IS-version
Ex ia = intrinsically safe for gases and dusts -
housing material titanium
-
temperature element Pt100
-
different kinds of elastomer

Stainless steel sensor
Stainless steel probe Ø 27 mm
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O
-
nominal temperature from 0 ... 30 °C up to 0 ... 70 °C
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 26.5 mm
-
separate output signals for pressure and temperture ranges
Optional Features
-
drinking water certificate acc. to DVGW and KTW
-
different kinds of cables
-
different kinds of elastomers
-
customer specific versions

Ceramic sensor
Stainless steel probe Ø 17 mm
Features
-
nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O
-
accuracy: 0.5 % FSO
-
diameter 17 mm
-
excellent long term stability
-
suitable for hydrostatic level measurement e.g. 3/4" pipes
-
excellent linearity
Optional Features
-
different cable materials
-
customer specific versions

Ceramic sensor
Stainless steel probe Ø 39.5 mm
Features
-
nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 39.5 mm
-
especially for sewage, viscous and pasty media
Optional Features
-
IS-version
Ex ia = intrinsically safe for gas and dust -
mounting with stainless steel pipe
-
flange version
-
diaphragm pure ceramic (99.9 % AI2O3)
-
different kinds of cables
-
different kinds of elastomers

Ceramic sensor
Plastic submersible probe Ø 35 mm
Features
-
nominal pressure: 0 ... 4 mH2O up to 0 ... 100 mH2O
-
accuracy: 0.5 % FSO
-
diameter 35 mm
-
excellent long term stability
-
easy handling
Optional Features
-
SIL 2 (safety integrity level) according to IEC 61508 / IEC 61511
-
different kinds of cables and elastomeres
-
customer specific version e.g. special pressure ranges

Ceramic sensor
Detachable plastic probe Ø 45 mm
Features
-
nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 45 mm
-
cable and sensor section detachable
-
chemical resistance
-
housing PP-HT
-
integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5
Optional Features
-
cable protection (on request)
-
diaphragm pure ceramic (99.9 % AI2O3)
-
different kinds of cables
-
different kinds of elastomeres

Stainless steel sensor
Detachable stainless steel probe Ø 35 mm
Features
-
nominal pressure: 0 ...4 mH2O up to 0...200 mH2O
-
accuracy: 0.1 % FSO
-
diameter 35 mm
-
cable and sensor section detachable
-
thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K
-
high accuracy
-
communication connection
Optional Features
-
IS-version
Ex ia = intrinsically safe for gas and dust -
mounting accessories as cable gland and terminal clamp in stainless steel
-
different kinds of cables
-
different kinds of seal materials

Ceramic sensor
with HART®-communication
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
HART®-communication
-
excellent long term stability
-
diameter 22 mm
-
highly appropriated for waste water
Optional Features
-
housing material titanium
-
IS-version
Ex ia = intrinsically safe for gas and dust -
temperature element Pt 100
-
different kinds of elastomer

Ceramic sensor
Stainless steel probe Ø 39.5 mm
Features
-
nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O
-
accuracy: 0.35 % (opt. 0.1 %) FSO
-
diameter 39.5 mm
-
shipping approvals
-
high overpressure capability
-
high long term stability
-
permissible temperatures up to 125 °C
Optional Features
-
IS-version
Ex ia = intrinsically safe for gas -
diaphragm pure ceramic (99.9% AI2O3)
-
different housing materials (stainless steel, CuNiFe)
-
screw-in and flange version accessoires

Stainless steel sensor
Slimline-probe Ø 19 mm
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 19 mm for cramped areas e.g. 1" observation well
-
small thermal effect
-
excellent linearity
-
excellent long term stability
Optional Features
-
different kinds of cable
-
customer specific versions e.g. special pressure ranges

Stainless steel sensor
Detachable stainless steel probe Ø 35 mm
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O
-
accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO
-
diameter 35 mm
-
cable and sensor section detachable
-
excellent long term stability
-
high accuracy
Optional Features
-
IS-version
Ex ia = intrinsically safe for gas and dust -
SIL 2 (Safety integrity level)
-
customer specific versions
-
mounting accessoires as cable gland and terminal clamp of stainless steel
-
different kinds of cables
-
different kinds of seal materials

Ceramic sensor (flush)
Level and temperature transmitter Ø 26.5
Features
-
nominal pressure: 0 ... 4 mH2O up to 0 ... 250 mH2O
-
nominal temperature: 0 ... 30 °C up to 0 ... 70 °C
-
accuracy: 0,5 % FSO
-
diameter 26,5 mm
-
separate output signals for pressure and temperture ranges
-
excellent accuracy
Optional Features
-
different kinds of cables
-
different kinds of seal materials
-
customer specific versions

Ceramic sensor (flush)
Stainless steel probe Ø 22 mm
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 22 mm
-
diaphragm ceramics Al2O3 (99.9 %)
-
highly appropriated for wastewater, sludge and viscous media
Optional Features
-
housing material titanium
-
IS-version
Ex ia = intrinsically safe for gas and dust -
drinking water certificate according to DVGW and KTW
-
temperature element Pt100
-
mounting with stainless steel tube
-
different kinds of cables and elastomers

Ceramic sensor
Detachable plastic level probe Ø 35 mm
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 35mm
-
diaphragm ceramics Al2O3 (99.9 %)
-
cable and sensor section detachable
-
excellent long term stability
-
integrated lightning protection 8 kA gas discharge tube (8/20µsec); 4 kV surge l-l/l-e according to EN61000-4-5
Optional Features
-
mounting accessories
-
different kinds of elastomer
-
customer specific versions

Ceramic sensor
Stainless steel probe Ø 27 mm
Features
-
nominal pressure: 0 ... 4 mH2O up to 0 ... 250 mH2O
-
accuracy: 0.5 % FSO
-
diameter 27 mm
-
excellent linearity
-
excellent accuracy
-
easy handling
Optional Features
-
IS-version
-
SIL 2 (safety integrity level) according to IEC 61508 / IEC 61511
-
different kinds of cables and elastomeres
-
customer specific versions

Ceramic sensor
Detachable stainless steel probe Ø 39.5
Features
-
nominal pressure: 0 ... 60 cmH2O up to 0 ... 100 mH2O
-
accuracy: 0.1 %
-
diameter 39.5 mm
-
cable and sensor section detachable
-
HART®-communication (setting of offset. span and damping)
-
permissible temperatures up to 85 °C
-
high long term stability
Optional Features
-
IS-version
Ex ia = intrinsically safe for gas and dust -
cable protection via corrugated pipe
-
diaphragm (AI2O3 99.9 %)
-
accessories

Ceramic sensor
with RS485 Modbus RTU
Features
-
nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
output signal: RS485 with Modbus RTU protocol
-
diameter 39.5 mm
-
excellent long-term stability
-
especially for sewage, viscous and pasty media
Optional Features
-
diaphragm ceramics Al2O3 99.9%

Ceramic sensor
Hydrostatic HART probe Ø 39.5 mm
Features
-
nominal pressure: 0 ... 60 cmH2O up to 0 ... 200 mH2O
-
accuracy: 0.1 % FSO
-
shipping approvals
-
diameter 39.5 mm
-
HART® communication
-
high overpressure capability
-
high long term stability
Optional Features
-
IS-version
Ex ia = intrinsically safe for gases and dusts -
diaphragm 99.9 % AI2O3
-
different housing materials (stainless steel, CuNiFe)
-
screw-in and flange version
-
accessoires

Stainless steel sensor
Stainless steel probe Ø 27 mm
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O
-
accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO
-
diameter 26.5 mm
-
small thermal effect
-
high accuracy
Optional Features
-
IS-version
Ex ia = intrinsically safe for gas and dust -
SIL 2 (safety integrity level)
-
drinking water certificate acc. to DVGW and KTW
-
different kinds of cables and elastomers
-
petrol version, welded pressure sensor and housing
-
mounting with stainless steel pipe

Stainless steel sensor
Detachable plastic probe Ø 35 mm
Features
-
nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 35 mm
-
cable and sensor section detachable
-
small thermal effect
-
integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5
Optional Features
-
SIL 2 (safety integrity level) according to IEC 61508 / 61511
-
different kinds of cable and elastomeres
-
customer specific versions

Ceramic sensor
Detachable stainless steel probe Ø 39.5
Features
-
nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 39.5 mm
-
cable and sensor section detachable
-
especially for sewage, viscous and pasty media
Optional Features
-
IS-protection
Ex ia = intrinsically safe for gas and dust -
cable protection via corrugated pipe
-
diaphragm pure ceramic (99.9 % AI2O3)
-
different kinds of cable
-
different kinds of elastomeres

Ceramic sensor (flush)
Plastic probe Ø 21 mm
Features
-
nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O
-
diameter 21 mm
-
excellent linearity
-
excellent long term stability
-
accuracy: 0.5% FSO
-
suitable for hydrostatic level measurement e.g. 3/4" pipes
Optional Features
-
different cable materials
-
customer specific versions, e.g. special pressure rang

Ceramic sensor
Plastic probe Ø 45 mm
Features
-
nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O
-
accuracy: 0.35 % (opt. 0.25 %) FSO
-
diameter 45 mm
-
chemical resistance
-
high overpressure capability
-
pure ceramic sensor
-
especially for tank level measurement of viscous and aggressive media
-
housing material PP-HT or PVDF
-
diaphragm ceramics Al2O3 (99.9 %)
Optional Features
-
different kinds of cable and seal materials
-
prepared for mounting with pipe